What have you done to your vehicle today?

Both will see the tarmac next month 👍
IMG_20220416_101242.jpg

checked fluids yesterday just got to do all the grease points also got mot in may as well,
 
Last edited:
In the mustang most likely. 👍
 
Changing out the rear fog reversing light cluster on van broke my T30 driver so had to buy new set as couldn't just buy just the T30.
IMG_20220422_130650.jpg
 
So it’s a few steps forward….then some backward.
 

Attachments

  • 44C12D80-04B8-44AB-AFD4-B2C47D115155.jpeg
    44C12D80-04B8-44AB-AFD4-B2C47D115155.jpeg
    3.6 MB · Views: 8
  • 692F4453-3090-4729-A05C-874B0EBE0A0D.jpeg
    692F4453-3090-4729-A05C-874B0EBE0A0D.jpeg
    1.6 MB · Views: 6
That's going to need some welding. Looking forward to progress pics
 
Welding done and turned round in yard,hopefully back on track to get it on the road at least
 

Attachments

  • F7566270-DED1-421A-8DA8-25D535095E23.jpeg
    F7566270-DED1-421A-8DA8-25D535095E23.jpeg
    1.7 MB · Views: 5
At least its nearer completion 👍 Than the red camaro in waterlooville lol😁
 
I had actually, finally sold the Grand Prix!!! But it came back ☹️
The guy messaged me a couple of days after he collected it to say it had overheated and blew all of the water out. I went to check it and looks like it's head gasket! Nothing he could have done wrong so we reversed the sale. Just one of those things I guess. It hadn't had any overheating issues before, but there was some brown mush in the radiator which looked like it had been there a while. I hadn't opened the rad for ages, I had no need to. Apparently the GM8 V6 engines suffered with inlet manifold problems that could leak water into the sump. I will probably do a post mortem to see what's happened when I get time.
 
Sorry to hear that Will. I sold a mini once then the gearbox broke, gave him his money back .then sold it spares or repair
 
not good , but start a thread on investigation and rebuild (y)
 
Mustang just passed its MOT!
Nice one, so does that mean you didn't need the suspension bits yet, you were just getting them as a upgrade?
 
That's a good owner still getting mot even tho it's not mot exempt. 👍👍
 
Had a moment on the Trans am today,modified the waste gate so when it finally gets on the road I can adjust the pressure,perhaps get 9psi as the brochure led you to believe in 1981
 

Attachments

  • 4CDCCA66-1B4E-4347-A854-ED9A8259107E.jpeg
    4CDCCA66-1B4E-4347-A854-ED9A8259107E.jpeg
    2 MB · Views: 4
  • 0EBAF829-D4D5-4D77-A022-2AFD1506305A.jpeg
    0EBAF829-D4D5-4D77-A022-2AFD1506305A.jpeg
    1.7 MB · Views: 5
  • B5044858-AEC3-4004-8145-6A64ED6AC5F8.jpeg
    B5044858-AEC3-4004-8145-6A64ED6AC5F8.jpeg
    2.5 MB · Views: 3
  • B02F1161-6C65-4E08-A533-74D02A70DD3C.jpeg
    B02F1161-6C65-4E08-A533-74D02A70DD3C.jpeg
    1.6 MB · Views: 3
Do you know what pressure you getting b4 your modification??? Thanks for posting pictures 👍😁
 
Do you know what pressure you getting b4 your modification??? Thanks for posting pictures 👍😁
No i don't,,,It has the 3 lights in the hood bulge, one is always on and the other's i believe illuminate around 3/4 psi and 6/7 psi. Once its in a position to be driven i will Tee in boost gauge and get it as close to 9 psi without destroying a 41yr old engine. I realise to some reading this that the figure's are somewhat low but remember this engine came out in 1980-1981 and was fairly advanced:D
 
Back
Top