Purchased a 1983 Pontic Firebird TransAm

Everything under the car has been cleaned up ready to spray on metal prep. I'll do that tomorrow as you need to keep it wet for 40mins before washing. Then wait for that to dry before putting on the rust protection. A full evening should do the trick.

I'll get these small parts below cleaned up too. I have new rubber bushes but need to reuse the metal clamps.
1000112982.jpg
 
Bit more done👍. Better stock up on cutting discs at this rate lol......

See sponge bob has been helping you 👍
 
Last edited:
Used my new cleaning discs to clean up these bracked that hold on the anti-roll bar.
1787774390456.png

1787774405172.png



Lets get this metal prep on the axle and everywhere else under here.
1787774433535.png


Good coule of coatings, eeing it wet for over 30mins
1787774457945.png


Not to forget about the underside of the tank.
1787774479078.png


All these bits coated too.
1787774515086.png


I had to rinse off with water afterwards. I used the spray gun part of the compressor with water. This was awesome. Loads of water everywhere.

Leaving the dehumidifier on to dry it out. The floor dosn't look wet in the above photo and this was after all the rinsing off.

1787774628299.png


All ready for a coat of this. Perhaps tommorow evening.
1787774650618.png
 
Get on well with it👍👍👍 you enjoying it
 
Yeah enjoying it. Doing it but by bit, no rush. It may be taking a long time and no one going to see it, but I know it's treated for many years to come.
 
Painted all I wanted ot paint.
1787863651792.png


1787863670204.png


1787863681853.png


Should be dry tomorrow. Ready to assemble it all.
 
Panhard bar on, and other beam above it. Shocks joined at that top. Next it thelower control arms.
1000113146.jpg


The lower control arms. Once on I'll slide in the springs before doing that lower shock attachment.
1000113147.jpg
 
A lot of it together now.
1000113152.jpg


Guess what numptie forgot this part.
1000113150.jpg


Some bits will need to be removed to lower the axle and thread it in.
Ill get back on it tomorrow.
 
It's looking good you need a JD to relax now lol.... But bet swmnbo has a few jobs for you???????
 
Back
Top