At many car shows many people are interested in the air box creation. Its a great talking point. I may be talking to someone else at the time, but was tihnking could I have a display board that sits at the front of the car showing photos, and info that would be perfect.
I have seen stands for the ground, but its packing them away into the car. i dont want anytihng large. Its bad nough with cairs and flags. Want something that is compact.
Ther eis a hold under the bonnet that I can hook something on to. Then having a way to hold 3 x A4 sheets would be perfect. I came up with the design below. Clamps in the sheet of laminated pater. The bolts are the same thats used on the airbox. Can attached 3D printed hinges link 3 of them together. They will fold up to the size of just over 1 x A4 sheet and about 2 inches thick.
Very happy with how its come out. There is a staggered join down the middle due to it being greater than 10 inches. The hinges will add strength around the join. It does feel strong as it is, glued it with that black sealent glue I used under the bonnet.
I must get a photo of the back too.
I have seen stands for the ground, but its packing them away into the car. i dont want anytihng large. Its bad nough with cairs and flags. Want something that is compact.
Ther eis a hold under the bonnet that I can hook something on to. Then having a way to hold 3 x A4 sheets would be perfect. I came up with the design below. Clamps in the sheet of laminated pater. The bolts are the same thats used on the airbox. Can attached 3D printed hinges link 3 of them together. They will fold up to the size of just over 1 x A4 sheet and about 2 inches thick.
Very happy with how its come out. There is a staggered join down the middle due to it being greater than 10 inches. The hinges will add strength around the join. It does feel strong as it is, glued it with that black sealent glue I used under the bonnet.
I must get a photo of the back too.
