steering

renchero

Well-known member
earlier in the year i got the Ranchero MOTed . passed no problem one advisory "slight play in the pitman arm" i thought
job for the winter. went on line to got a new one, problem there ain't any. plan B buy a used steering box and hope the arm is OK. plan B worked. earlier this week i am laying under the ranchero trying to work out how to hold the arm to undo the big nut without straining anything. i could detect no play in it but i did have some play in the "rag joint"
20261025_171024.jpg
 
At least rag joints are easy to get unless you got the welded shaft type. No pitman arms?????
 
20261028_112548.jpg

ford say change the whole assembly. the joint is sold by Dorman as a separate part and as i had one, thats what i did. however i got the kit years ago, but the wrong one. the hardware was no use. the joint did fit so i used the original bolts and made 2 pins to replace the 2 that were drilled out .
 
Always handy to have spares. Sounds like you have a good solution.
 
all fitted now. is it any better ? i find out when the gearbox is fixted.
 
When you get the box back in, have someone rock the steering wheel while you watch the rag joint; any lost motion at the pins or between the joint halves will show before you judge the box. Also make sure the steering wheel is centred and the joint isn’t sitting at an awkward angle. Worth rechecking those original bolts after a few miles.
 
Back
Top