TransAmDan

Garden adjustments in preparation for a wider garage

Rate this Entry
Well this is going to be a fairly long term project. My plan is to build a shed on a concrete base, the mud from the base of the shed will make a raised flower bed. The brick outhouse at the end of the garden, (shown just below the Trans-Am in the photo) has a few garden tools in it, so need a shed to house these items and the BBQ. So then this outhouse can be knocked down to widen the driveway, once the drive way is widened, then widen the garage.
Calenders For Sale-house.jpg
The shed base is complete, and power is running to it.

Just popped out at lunch today and ordered the wood from Goodwillies (the local saw mill) Delivery for Friday 14th Oct. The size of the shed will be big enough to store the bikes with an anchor point to the ground. Will also put a desk in it, so can do soldering etc out there. There will be a window too, also planned in hanging points for hanging baskets and bird feeders, so nice to have a window, may be able to get close to birds.

The shed will be double skin, using tongue and grove 25mm on the outside screwed to a 2 inch thick wooden frame, in this frame there will be some form of insulation, perhaps polystyrene. Then on the inside it will be finished with 19mm thick tongue and groove. All outside wood and frame will be treated as being assembled. The inside will probably be varnished. LED spot lighting inside with the security light in the porch area, yes it will have a porch. This is so you have shelter if raining while opening the shed.

Progress photos and plans to come. ...

Notice Sarahs Camaro on the road in the photo. Well this will be coming out again, just got soo many thing to get done, widening the drive way to get the vehicles off the road will certainly help.

Updated 05-10-2016 at 14:45 by TransAmDan

Tags: None Add / Edit Tags
Categories
General DIY

Comments

Page 2 of 2 FirstFirst 12
  1. saleen 192's Avatar
    bl##dy nora
  2. TransAmDan's Avatar
    Got more wood from Goodwillies. This is to finish off the outside. Wanting to box in the roof underneath, hiding the beams. Just really wanting it to look nice. Plug I needed some more to finish the sides and the door.

    The van floor is 3meters long, however the planks of wood were up to 4.8m. I took my battery circular saw, and cut them down to fit.


    Having to cut some fancy notches to avoid the beams.

    Now it tucks in above the window.


    Boxing in the roof beams, looks quite nice if I say so myself.
  3. saleen 192's Avatar
    No roof rack on van then?????? should give up your day job sitting behind a desk and become a chippy no not the salt and vinger ones........
Page 2 of 2 FirstFirst 12